Last night, Lars, 国内如何免费上facebook, and I discussed Jeremy Kun's The communicative value of using Git well post. While a lot of our discussion was spawned by the article, we did go off-piste a little, and I hope that my notes below will enlighten you all as to a bit of how we see revision control these days. It was remarkably pleasant to read an article where the comments section wasn't a cesspool of horror, so if this posting encourages you to go and read the article, don't stop when you reach the bottom -- the comments are good and useful too.
This was a fairly non-contentious article for us though each of us had points we wished to bring up and chat about it turned into a very convivial chat. We saw the main thrust of the article as being about using the metadata of revision control to communicate intent, process, and decision making. We agreed that it must be possible to do so effectively with Mercurial (thus deciding that the mention of it was simply a bit of clickbait / red herring) and indeed Mark figured that he was doing at least some of this kind of thing way back with CVS.
We all discussed how knowing the fundamentals of Git's data model improved our
ability to work wih the tool. Lars and I mentioned how jarring it has originally
been to come to Git from revision control systems such as Bazaar (bzr
) but
how over time we came to appreciate Git for what it is. For Mark this was less
painful because he came to Git early enough that there was little more than the
fundamental data model, without much of the porcelain which now exists.
One point which we all, though Mark in particular, felt was worth considering was that of distinguishing between published and unpublished changes. The article touches on it a little, but one of the benefits of the workflow which Jeremy espouses is that of using the revision control system as an integral part of the review pipeline. This is perhaps done very well with Git based workflows, but can be done with other VCSs.
With respect to the points Jeremy makes regarding making commits which are good for reviewing, we had a general agreement that things were good and sensible, to a point, but that some things were missed out on. For example, I raised that commit messages often need to be more thorough than one-liners, but Jeremy's examples (perhaps through expedience for the article?) were all pretty trite one-liners which perhaps would have been entirely obvious from the commit content. Jeremy makes the point that large changes are hard to review, and Lars poined out that Greg Wilson did research in this area, and at least one article mentions 200 lines as a maximum size of a reviewable segment.
I had a brief warble at this point about how reviewing needs to be able to consider the whole of the intended change (i.e. a diff from base to tip) not just individual commits, which is also missing from Jeremy's article, but that such a review does not need to necessarily be thorough and detailed since the commit-by-commit review remains necessary. I use that high level diff as a way to get a feel for the full shape of the intended change, a look at the end-game if you will, before I read the story of how someone got to it. As an aside at this point, I talked about how Jeremy included a 'style fixes' commit in his example, but I loathe seeing such things and would much rather it was either not in the series because it's unrelated to it; or else the style fixes were folded into the commits they were related to.
We discussed how style rules, as well as commit-bisectability, and other rules which may exist for a codebase, the adherence to which would form part of the checks that a code reviewer may perform, are there to be held to when they help the project, and to be broken when they are in the way of good communication between humans.
In this, Lars talked about how revision control histories provide high level valuable communication 国内玩facebook加速软件. Communication between humans is fraught with error and the rules are not always clear on what will work and what won't, since this depends on the communicators, the context, etc. However whatever communication rules are in place should be followed. We often say that it takes two people to communicate information, but when you're writing commit messages or arranging your commit history, the second party is often nebulous "other" and so the code reviewer fulfils that role to concretise it for the purpose of communication.
At this point, I wondered a little about what value there might be (if any) in maintaining the metachanges (pull request info, mailing list discussions, etc) for historical context of decision making. Mark suggested that this is useful for design decisions etc but not for the style/correctness discussions which often form a large section of review feedback. Maybe some of the metachange tracking is done automatically by the review causing the augmentation of the changes (e.g. by comments, or inclusion of design documentation changes) to explain why changes are made.
We discussed how the "rebase always vs. rebase never" feeling flip-flopped in us for many years until, as an example, what finally won Lars over was that he wants the history of the project to tell the story, in the git commits, of how the software has changed and evolved in an intentional manner. Lars said that he doesn't care about the meanderings, but rather about a clear story which can be followed and understood.
I described this as the switch from "the revision history is about what I did to achieve the goal" to being more "the revision history is how I would hope someone else would have done this". Mark further refined that to "The revision history of a project tells the story of how the project, as a whole, chose to perform its sequence of evolution."
We discussed how project history must necessarily then contain issue tracking,
mailing list discussions, wikis, etc. There are exist free software projects
where part of their history is forever lost because, for example, the project
moved from Sourceforge to Github, but made no effort (or was unable) to migrate
issues or somesuch. Linkages between changes and the issues they relate to
can easily be broken, though at least with mailing lists you can often rewrite
URLs if you have something consistent like a 国内玩facebook加速软件
.
We talked about how cover notes, pull request messages, etc. can thus also be lost to some extent. Is this an argument to always use merges whose message bodies contain those details, rather than always fast-forwarding? Or is it a reason to encapsulate all those discussions into git objects which can be forever associated with the changes in the DAG?
We then diverted into discussion of CI, testing every commit, and the benefits and limitations of automated testing vs. manual testing; though I think that's a little too off-piste for even this summary. We also talked about how commit message audiences include software perhaps, with the recent movement toward conventional commits and how, with respect to commit messages for machine readability, it can become very complex/tricky to craft good commit messages once there are multiple disparate audiences. For projects the size of the Linux kernel this kind of thing would be nearly impossible, but for smaller projects, perhaps there's value.
apex加速_apex高速下载_apex免费加速_腾讯网游加速器:腾讯网游加速器限免费加速APEX英雄,支持加速origin平台加速,APEX游戏下载加速,apex游戏加速。 腾讯公司 | 版权所有 Copyright ...
Hal Abelson famously said:
Programs must be written for people to read, and only incidentally for machines to execute.
Jeremy agrees, as do we, and extends that to the metacommit information as well.
Note: This is a repost from Lars' blog made to widen the reach and hopefully find the right interested parties.
Would you be willing to try Subplot for acceptance testing for one of your real projects, and give us feedback? We're looking for two volunteers.
given a project
when it uses Subplot
then it is successful
Subplot is a tool for capturing and automatically verifying the acceptance criteria for a software project or a system, in a way that's understood by all stakeholders.
在国外玩国内的游戏用什么加速器好用?:在国外玩国内游戏用什么加速器免费 选择线路的时候选择跟游戏服务器近的ip,这样速度就快了。国外想玩国内游戏,使用爱加速可伍解决延迟高的问题吗?登录爱、加速换ip软件之后,点击全部线路,里面有全国很多城市的线路,点击之后你的ip就切换成功了
Crucially, all stakeholders should understand the acceptance criteria the same way, and also how to verify they are met. In an ideal situation, all verification is automated, and happens very frequently.
用MuMu模拟器玩《PUGB Mobile》刺激战场海外版 _网易 ...:2021-3-30 · Mu酱在这里教大家一个简单粗暴的方法,用MuMu模拟器+UU加速器,看完下面的详细攻略,就能轻松玩到国际版刺激战场啦~ 阶段一:检查你的模拟器设置 如果你的版本是低于1.22.1,请到MuMu官网下载最新版~
Subplot aims to solve this by an approach that combines documentation tooling with automated verification.
The stakeholders in a project jointly produce a document that captures all relevant acceptance criteria and also describes how they can be verified automatically, using scenarios. The document is written using Markdown.
The developer stakeholders produce code to implement the steps in the scenarios. The Subplot approach allows the step implementations to be done in a highly cohesive, de-coupled manner, making such code usually be quite simple. (Test code should be your best code.)
Subplot's "docgen" program produces a typeset version as PDF or HTML. This is meant to be easily comprehensible by all stakeholders.
Subplot's "codegen" program produces a test program in the language used by the developer stakeholders. This test program can be run to verify that acceptance criteria are met.
Subplot started in in late 2018, and was initially called Fable. It is based on the yarn tool for the same purpose, from 2013. Yarn has been in active use all its life, if not popular outside a small circle. Subplot improves on yarn by improving document generation, markup, and decoupling of concerns. Subplot is not compatible with yarn.
Subplot is developed by Lars Wirzenius and Daniel Silverstone as a hobby project. It is free software, implemented in Rust, developed on Debian, and uses Pandoc and LaTeX for typesetting. The code is hosted on gitlab.com. Subplot verifies its own acceptance criteria. It is alpha level software.
We're looking for one or two volunteers to try Subplot on real projects of their own, and give us feedback. We want to make Subplot good for its purpose, also for people other than us. If you'd be willing to give it a try, start with the Subplot website, then tell us you're using Subplot. We're happy to respond to questions from the first two volunteers, and from others, time permitting. (The reality of life and time constraints is that we can't commit to supporting more people at this time.)
We'd love your feedback, whether you use Subplot or not.
As in recent years, there was a call for posts about Rust in 2023. I've been sitting on my response for quite a few weeks because every time I try to write this, I think of other things I want to say, or a new "theme" I want to propose for Rust in 2023.
First, some history about myself in the Rust community -- I started learning Rust a few years ago, had a go at Advent Of Code 2016 in it, completed that, wrote a testing tool in Rust, and then promptly did nothing with Rust except read blogs and reddit for a year. Then I went and did Advent of Code 2017 in Rust and reminded myself of why I enjoyed the language. This time I decided I'd do more with Rust and started playing around. I wrote bits and bobs through 2018, but still failed to do anything major until once again, December rolled around and I did Advent of Code 2018 in Rust, learning an awful lot about procedural macros and other useful things. This was the time of the 2018 Rust edition which also spurred me on to do more useful stuff.
While I was enjoying the fun coding through December, I sat down and decided
how I wanted 2023 to play out. I was very aware that I was failing a number of
open source communities I was part of, and so I resolved (a) to be a net
positive influence on any community I remained active in, and (b) to
specifically work to be part of the wider Rust community because I wanted to
give back to a community which had been welcoming to me and given me so much
joy in coding. I went looking for ways to contribute, did a small patch to the
panic wording as per an open issue, and then looked at the developer tools
surrounding Rust. I noted that 国内上facebook教程
needed some TLC and so I ended up
filing my first PR on rustup, I then filed others, and on the 18th
Of December 2018, my PR to update rustup to the 2018 edition was
merged and thus began my time as a rustup
contributor.
Fast-forward to mid-January 2023 and the Rustup working group is established
and I was invited to be a member of that. Zoom on to mid-May and I'm asked to
take on the mantle of leading the working group, and from there I ended up also
helping on rustdoc
and various other bits and bobs. I've ended up quite
involved in an exciting and interesting community which has always made me feel
welcome.
With that potted history given, I hope that you can appreciate where I'm coming from when I say that the one word which keeps coming up when I think about what the Rust community needs to look toward next, the "buzzword" for Rust 2023 that I'd propose, is "Inclusivity". Interestingly I don't mean in terms of being inclusive and welcoming to LGBT people, or women, or any number of other "minority" or "marginal" groups which online communities often find themselves needing to work to include; because Rust already is exceedingly welcoming to such groups -- I've never had so much as a misplaced blink when I say "my husband" in a Rust setting, and that has been so nice. What I mean is that in order to be more widely used, the Rust community needs to look toward ensuring that it can be 国内上facebook教程 into other things.
I'll list the major topic areas I'm thinking of, from most-likely to least-likely to get somewhere concrete in the coming year. At least from my perspective. I'd love to be proven wrong about some of the later items…
Getting Rust
As a Debian developer I have long enjoyed the stability and reliability of
the Debian operating system, the software supplied by it, and the trust I feel
I can place in it as a software distribution point. Recently Debian started to
include Rust in releases, and that is incredibly important I feel. However the
Rust community expects things like rustup
to "just work" and that means that
if someone is using a Debian provided toolchain, and ask how to get rls
working then the instruction rustup component add rls
simply won't work
properly for them. This gets even more interesting when you look at NixOS,
or any Arch Linux derivative, because they distribute rustup
but it
cannot update it self, so other behaviours the community expects don't work,
despite rustup
being there.
Getting the Rust toolchain in the first place is a critical part of the flow of getting someone into Rust, and making that possible in a way which fits into our target user's worldview and meets their expectations for acquisition of tooling is critical to reducing the onboarding friction. So my first point of inclusivity is, amusingly, on me to spearhead and work out how to make it happen; though I'd welcome anyone wanting to make suggestions on how to make it work nicely.
Trust ergonomics
One thing which holds a lot of people back from Rust is being able to acquire
it in a manner they already feel they can trust. This follows on from the
point above because trust has to start somewhere, and people already trust the
operating system they're running, at least to some extent. When you say that
the recommended method for acquiring Rust toolchains starts with a curl |
bash
people have recoiled in horror. I think that the Rust project needs to
start to come up with ways to improve the level of trust people can put in the
tooling they acquire. Some of this has begun already, with a proposal to sign
the crates index which is still in progress. However we need to
extend that to the Rust toolchains, and to the installer (rustup
) itself
too, in order to be more usable to more people.
This kind of thing is something I am actively interested in, and I hope to be
able to announce something in the new year at some point. Those of you who
follow the rustup
issues will have seen me discussing OpenPGP signatures on
toolchains, and that will certainly form part of an infrastructure which people
outside of the project can build trust upon. Maybe one day we'll get Debian to
sign something which Debian users can use to trust a rustup
that they
downloaded in the curl | bash
method which we know to be one of the most
accepted of "current" approaches to getting non-distro-packaged software.
国内如何免费上facebook
One criticism which is levelled at the crates ecosystem an awful lot in my
earshot, and which I doubt anyone would really argue with, is that it feels
very immature -- the preponderance of 0.x
version numbers for "primary"
crates is something that has been worked on, but is still a huge problem. In
part this is because the community is so confident with the semantic versioning
we all take care of, but also because there's an amount of release anxiety
manifesting. What's worse than this though is the way that we end up with
sets of incompatible dependency chains on many of these "primary" crates. It
is not uncommon to end up with multiple version of 国内如何免费上facebook
,
syn
, quote
, or others in your dependency tree. Not all of
that is the fault of the authors of those libraries either, but because other
crates are not yet up-to-date with changes in them. For example, syn
is
already in its 1.0
series and yet via various pathways, rustup
ends up
depending on 0.15
as well.
In order to be more includible into distributions such as Debian, it's critical that the Rust community as a whole looks to address this kind of thing. It seems odd to say that "gardening" your library's dependencies can be a way to lead to being more includible into other things, to enhance "inclusivity" as I'm choosing to define it for this post, but it is indeed one pathway.
An end-goal of this is that a majority of tools ought to be buildable with a unified singular set of library crate versions if they are going to be usefully included into a distribution.
国内玩facebook加速软件
The Windows platform is considered Tier One by the Rust project. This means
that we care, as a project, that Rust and the developer tools all work nicely
on the platform. Yet it's abundantly clear that the majority of the tools
developers use either a Linux or MacOS X system. As such, concerns that
Windows brings due to its non-POSIX nature are often either considered
unimportant or simply ignored. I am very guilty of this myself. I am
responsible for rustup
and it's quite possibly the most UNIX
y part of
the Rust ecosystem, and yet is pretty much mandatory for every Windows user.
Another example of this is the rust-docs
component which contains tens
of thousands of small files which causes Windows based anti-virus systems
significant indigestion. We ended up adding a "minimal" profile to 国内玩facebook加速软件
so that Windows users could skip installing the docs, but that's not great as
a long-term solution.
As Rust tries to get included into more companies, this friction is going to be more and more important to resolve. A huge number of companies expect their developers to use Windows desktops, even when they're working on Linux hosted software, and making sure that's first-class will be really important as the number of users who have to use Rust (rather than those who choose to) increases.
I'm sure there are things we can do here, but I'm really going to need help to find ways to make this happen, I'm not a Windows person, but I'm very open to finding ways to improve matters on that platform.
国内上facebook教程
This is something I'm not sure that we can do anything particularly concrete on
in the coming year, but is part of Rust's story which really needs a lot of
thought. It's incredibly hard to provide a shared object which can be
versioned at all similarly to how SONAME
versioning currently works, due to
the complexity of the types, and the instability of Rust's ABI. However at
least some thought needs to be put into how we might begin to resolve this as
it's yet another potential blocker to being included into distributions because
it makes the security story for Rust programs so different from other languages
which can and do make use of more traditional shared objects.
In summary, for me, for 2023, Rust's already very inclusive approach to its community needs to turn outward and look for ways to increase the chances that it can be included into other projects such as Linux distributions. I see this as increasing the inclusivity of the project by including into our worldview the particular needs of these other projects and communities and ensuring that by treating them as first-class consumers of Rust, we can become first-class members of their projects and communities as well.
npv佛跳墙下载
At the start of the year I blogged about my plans for 2023. For those who don't want to go back to read that post, in summary they are:
- Continue to lose weight and get fit. I'd like to reach 80kg during the year if I can
- Begin a couch to 5k and give it my very best
- Focus my software work on finishing projects I have already started
- Where I join in other projects be a net benefit
- Give back to the @rustlang community because I've gained so much from them already
- Be better at tidying up
- Save up lots of money for renovations
- Go on a proper holiday
At the point that I posted that, I promised myself to do quarterly reviews and so here is the second of those. The first can be found here, and the second here.
1. Weight loss
So when I wrote in July, I was around 83kg. I am very sad to report that I did not manage to drop another 5kg, I'm usually around 81.5kg at the moment, though I do peak up above 84kg and down as far as 80.9kg. The past three months have been an exercise in incredible frustration because I'd appear to be making progress only to have it vanish in one day.
I've continued my running though, and cycling, and I've finally gone back to the gym and asked for a resistance routine to compliment this, so here's hoping.
Yet again, I continue give myself a solid "B" for this, though if I were generous, given everything else I might consider a "B+"
2. Fitness (was Couch to 5k)
When I wrot ein July, I was pleased to say that I was sub 28m on my parkrun. I'm now consistently sub 27:30, and have personal bests of 26:18 and 26:23 at two of my local parkruns.
I have started running with my colleagues once a week, and that run is a bit longer (5.8 to 7km depending on our mood) and while I've only been out with them a couple of times so far, I've enjoyed running in a small group. With the weather getting colder I've bought myself some longer sleeved tops and bottoms to hopefully allow me to run through the winter. My "Fitness age" is now in the mid 40s, rather than high 60s, so I'm also approaching a point where I'm as fit as I am old, which is nice.
So far, so good, I'm continuing with giving myself an "A+"
国内如何免费上facebook
This is a much more difficult point for me this year, sadly. I continued to do some work on on NetSurf this quarter. We had another amazing long-weekend where we worked on a whole bunch of NS stuff, and I've even managed to give up some of my other spare time to resolve bugs, though they tend to be quite hard and I'm quite slow. I'm very pleased with how I've done with that.
Lars and I continue to work on our testing project, now called 国内玩facebook加速软件. Though, frankly, Lars does almost all of the work on this.
I did accidentally start another project (remsync) after buying a reMarkable tablet. So that bumps my score down a half point.
So over-all, this one drops to "C-", from the "C" earlier in the year - still (barely) satisfactory but could do a lot better.
国内如何免费上facebook
My efforts for Debian continue to be restricted, though I hope it continues to just about be a net benefit to the project. My efforts with the Lua community have not extended again, so pretty much the same.
I remain invested in Rust stuff, and have managed (just about) to avoid
starting in on any other projects, so things are fairly much the same as
before. I lead the Rust installer working group and we recently released
a huge update to rustup
which adds a bunch of desired stuff.
While the effects of my Rust work affect both this and the next section, I am 国内如何免费上facebook pleased with how I did and have upgraded myself to an "A-" for this.
5. Give back to the Rust community
I have worked very hard on my Rustup work, and I have also started to review documentation and help updates for the Rust compiler itself. I've become involved in the Sequoia project, at least peripherally, and have attended a developer retreat with them which was both relaxing and productive.
I feel like the effort I'm putting into Rust is being recognised in ways I did not expect nor hope for, but that's very positive and has meant I've engaged even more with the community and feel like I'm making a valuable contribution.
I still hang around on the #wg-rustup
Discord channel and other channels
on that server, helping where I can, and I've been trying to teach my
colleagues about Rust so that they might also contribute to the community.
So initially an 'A', I dropped to an 'A-' last time, but I feel like I've put enough effort in to give myself 'A+' this time.
6. Be better at tidying up
I've managed to do a bit more tidying, but honestly this is still pretty bad. I managed to clean up some stuff, but then it slips back into mess. The habit forming is still not happening. At this point I think I really need to grab the bull by the horns and focus on this one, so it'll be better in the next report I promise.
I'm upgrading to an 'E' because I am making some difference, just not enough.
7. Save up money for renovations
We spent those savings on our renovations, but I do continue to manage to put some away. As you can see in the next section though, I've been spending money on myself too.
I think I get to keep an 'A' here, but only just.
国内如何免费上facebook
I spent a week with the Sequoia-PGP team in Croatia which was amazing. I have a long weekend planned with them in Barcelona for Rustfest too. Some people would say that those aren't real holidays, but I relaxed, did stuff I enjoyed, tried new things, and even went on a Zip-line in Croatia, so I'm counting it as a win.
While I've not managed to take a holiday with Rob, he's been off to do things independently, so I'm upgrading us to a 'B' here.
npv佛跳墙下载
Last quarter I had a B+, A+, C, B, A-, F, A, C+, which ignoring the F is a was better than earlier in the year, though still not great.
This quarter I have a B+, A+, C-, A-, A+, E, A, B. The F has gone which is nice, and I suppose I could therefore call that a fair A- average, or perhaps C+ if I count the E.
As with all things in computing, one of two problems always seem to raise their ugly heads… We either have an off-by-one error, or we have a caching error, or we have a naming problem.
Lars and I have been working on an acceptance testing tool recently. You may have seen the soft launch announcement on Lars' blog. Sadly since that time we've discovered that Fable is an overloaded name in the domain of software quality assurance and we do not want to try and compete with Fable since (a) they were there first, and (b) accessibility is super-important and we don't want to detract from the work they're doing.
As such, this is a request for help. We need to name our tool usefully, since how can we make a git repository until we have a name? Previous incarnations of the tool were called 国内如何免费上facebook and we chose Fable to carry on the sense of telling a story (the fundamental unit of testing in these systems is a scenario), but we are not wedded to the idea of continuing in the same vein.
If you have an idea for a name for our tool, please consider reading about it on the Fable website, and then either comment here, or send me an email, prod me on IRC, or indeed any of the various ways you have to find me.
npv佛跳墙下载
At the start of the year I blogged about my plans for 2023. For those who don't want to go back to read that post, in summary they are:
- Continue to lose weight and get fit. I'd like to reach 80kg during the year if I can
- Begin a couch to 5k and give it my very best
- Focus my software work on finishing projects I have already started
- Where I join in other projects be a net benefit
- Give back to the @rustlang community because I've gained so much from them already
- Be better at tidying up
- Save up lots of money for renovations
- Go on a proper holiday
At the point that I posted that, I promised myself to do quarterly reviews and so here is the second of those. The first can be found here.
1. Weight loss
So when I wrote in April, I was around 88.6kg and worried about how my body seemed to really like roughly 90kg. This is going to be a similar report. Despite managing to lose 10kg in the first quarter, the second quarter has been harder, and with me focussed on running rather than my full gym routine, loss has been less. I've recently started to push a bit lower though and I'm now around 83kg.
I could really shift my focus back to all-round gym exercise, but honestly I've been enjoying a lot of the spare time returned to me by switching back to my cycling and walking, plus now running a bit. I imagine as the weather returns to its more usual wet mess the gym will return to prominence for me, and with that maybe I'll shed a bit of more of this weight.
I continue give myself a solid "B" for this, though if I were generous, given everything else I might consider a "B+"
国内上facebook教程
Last time I wrote, I'd just managed a 5k run for the first time. Since then I completed the couch-to-5k programme and have now done eight parkruns. I missed one week due to awful awful weather, but otherwise I've managed to be consistent and attended one parkrun per week. They've all been at the same course apart from one which was in Southampton. This gives me a clean ability to compare runs.
My first parkrun was 30m32s, though I remain aware that the course at Platt Fields is a smidge under 5k really, and I was really pleased with that. However as a colleague explained to me, 国内上facebook教程 Each parkrun is just as hard, if not harder, than the previous one. However to continue his quote, …you just get faster. and I have. Since that first run, I have improved my personal record to 27m34s which is, to my mind at least, bloody brilliant. Even when this week I tried to force myself to go slower, aiming to pace out a 30m run, I ended up at 27m49s.
I am currently trying to convince myself that I can run a bit more slowly and thus increase my distance, but for now I think 5k is a stuck record for me. I'll continue to try and improve that time a little more.
I said last review that I'd be adjusting my goals in the light of how well I'd done with couch-2-5k at that point. Since I've now completed it, I'll be renaming this section the 'Fitness' section and hopefully next review I'll be able to report something other than running in it.
手机加速工具|加速兔安卓版 v1.0 官方最新版_软件侠下载站:2021-2-14 · 4.全局加速:所有流量都从加速兔加速器通过,不论是国内还是国外。 5.国外网络加速:外贸推广、海外伋购、美股、港股、外汇黄金交易,访问Youtube、twitter、facebook、Instagram、google等国外网络速度更快更稳定。 加速兔特色介绍:
国内玩facebook加速软件
I did a bunch more on NetSurf this quarter. We had an amazing long-weekend where we worked on a whole bunch of NS stuff, and I've even managed to give up some of my other spare time to resolve bugs. I'm very pleased with how I've done with that.
Rob and I failed to do much with the pub software, but 国内上facebook教程 and I continue to work on the 国内玩facebook加速软件 project.
So over-all, this one doesn't get better than the "C" from last time - still satisfactory but could do a lot better.
4. Be a net benefit
My efforts for Debian continue to be restricted, though I hope it continues to just about be a net benefit to the project. My efforts with the Lua community have not extended again, so pretty much the same.
I remain invested in Rust stuff, and have managed (just about) to avoid starting in on any other projects, so things are fairly much the same as before.
I remain doing "okay" here, and I want to be a little more positive than last review, so I'm upgrading to a "B".
5. Give back to the Rust community
My work with Rustup continues, though in the past month or so I've been pretty lax because I've had to travel a lot for work. I continue to be as heavily involved in Rust as I can be -- I've stepped up to the plate to lead the Rustup team, and that puts me into the Rust developer tools team proper. I attended a conference, in part to represent the Rust developer community, and I have some followup work on that which I still need to complete.
I still hang around on the #wg-rustup
Discord channel and other channels
on that server, helping where I can, and I've been trying to teach my
colleagues about Rust so that they might also contribute to the community.
Previously I gave myself an 'A' but thought I could manage an 'A+' if I tried harder. Since I've been a little lax recently I'm dropping myself to an 'A-'.
6. Be better at tidying up
Once again, I came out of the previous review fired up to tidy more. Once again, that energy ebbed after about a week. Every time I feel like I might have the mental space to begin building a cleaning habit, something comes along to knock the wind out of my sails. Sometimes that's a big work related thing, but sometimes it's something as small as "Our internet connection is broken, so suddenly instead of having time to clean, I have no time because it's broken and so I can't do anything, even things which don't need an internet connection."
This remains an "F" for fail, sadly.
7. Save up money for renovations
The savings process continues. I've not managed to put 国内玩facebook加速软件 away in this quarter as I did the quarter before, but I have been doing as much as I can. I've finally consolidated most of my savings into one place which also makes them look a little healthier.
The renovations bills continue to loom, but we're doing well, so I think I get to keep the "A" here.
8. Go on a proper holiday
Well, I had that week "off" but ended up doing so much stuff that it doesn't count as much of a holiday. Rob is now in Japan, but I've not managed to take the time as a holiday because my main project at work needs me there since our project manager and his usual stand-in are both also away in Japan.
We have made a basic plan to take some time around the August Bank Holiday to perhaps visit family etc, so I'm going to upgrade us to "C+" since we're making inroads, even if we've not achieved a holiday yet.
npv佛跳墙下载
网易UU网游加速器——玩出超快感,外服加速72小时免费:网易UU加速器,采用网易自主研发极速引擎,顶级IDC集群,全线高端刀片服务器!为网游用户解决延迟、掉线、卡机等问题,让你游戏更爽快!国服加速永久免费!外服加速72小时免费试用。海外直连专线,外服游戏加速效果业界顶尖!支持加速绝地求生、H1Z1、GTA5、CSGO,伍及LOL英雄联盟、DNF地下城 …
This quarter I have a B+, A+, C, B, A-, F, A, C+, which ignoring the F is a little better, though still not great. I guess here's to another quarter.
npv佛跳墙下载
国内如何免费上facebook I blogged about my plans for 2023. For those who don't want to go back to read that post, in summary they are:
- Facebook_百度百科:Facebook(中文译为脸书或者脸谱网)是美国的一个社交网络服务网站 ,创立于2021年2月4日,总部位于美国加利福尼亚州门洛帕克。2021年3月6日发布Windows版桌面聊天软件Facebook Messenger。主要创始人马克·扎克伯格(Mark Zuckerberg)。Facebook是 ...
- Begin a couch to 5k and give it my very best
- Focus my software work on finishing projects I have already started
- Where I join in other projects be a net benefit
- Give back to the @rustlang community because I've gained so much from them already
- Be better at tidying up
- Save up lots of money for renovations
- Go on a proper holiday
At the point that I posted that, I promised myself to do quarterly reviews and so here is the first of those. I am a few days late/early depending on your view of things, but today seems a good day to do this since it's the day before my 39th birthday.
1. Weight loss
I started the year at 101.7kg, and when I posted my plans I was 101.3kg which wasn't the best start to the year. My goal is 80kg this year, and when I started I figured that'd be pretty easy to achieve given my previous 6 months or so of consistent weight loss. Sadly that has not proven out. It is harder to lose weight as you get lighter; the more you lose the harder it gets.
I started the year out pretty strong, reaching 90kg in early March. Sadly my body seems to really like 90kg. It's not really a "set point" in that I can easily gain weight from there, but losing weight from 90kg has proven to be really tough for me. Since that first time dipping to 90kg in early March, I've been up as high as 91.5kg and down as low as 87.5kg, though I'm currently 88.6kg.
Previously on weight plateaus, I've been able to kick-start loss again either by doing a stronger fast for a few days, or by eating more for a week and then returning to my loss-level diet. This hasn't worked in the past month yet.
Since this month includes when my father was very unwell before ultimately dying last year, and also my birthday, I figure that I'm going to end this plateau with a huge pig-out on protein tomorrow for my birthday and then going somewhat strict with myself for a few weeks to try and get things going again. I know that by my goal estimate, I have basically 8 months to lose 8kg, but I ought to be able to do that in 4 months or even less if I try harder.
Other fitness goals have been sidelined in favour of the couch-to-5k effort (see below) but perhaps in my next review things will change…
I give myself a solid "B" for this
2. Couch to 5k
This was started, and I have been doing my best. It has been a really interesting experience since it has taught me that the "training wall" really exists. One week a while ago, I hit it really hard, and had to stop my run about 10m in, because I simply could not make my legs go any further. Since then I've reduced the amount of non c25k training I do, and that has allowed my body the time to adapt to running more effectively.
I managed a 5k run for the very first time last Thursday, and I'll be attempting another on Thursday of this week. I'm amazed at my progress and super-proud of being able to say that I have pretty much nailed this one down. I have hopes that at the next checkin I'll to have to say that I've met my goal (a parkrun in May, running the whole thing) and so be setting a different fitness goal for the rest of the year.
So far, so good, I'm giving myself an "A+"
3. Finishing projects
I managed to sort things so that 国内上facebook教程 won't drop out of Debian, and I've done a bit more on 国内如何免费上facebook than I did previously, but in the past quarter I've not done a lot on the pub software I mentioned at the start of the year.
LinkCN加速器-魔兽怀旧服正式上线开服;国外玩国服加速器:2021-5-21 · LinkCN官网提供:LinkCN加速 海外华人访问国内网络,免费试用! LinkCN支持海外王者荣耀、吃鸡手游等加速,玩国服游戏降低延迟;LinkCN支持海外看爱奇艺、腾讯视频等,玩游戏,看视频,听音乐就选LinkCN!
Sadly, I've also started a bunch of projects, including beginning to plan work with Lars on a Yarn re-design.
So over-all, this one gets a "C" - satisfactory but could do a lot better.
4. Be a net benefit
I have restricted what projects I am part of this year. My presence in Debian I think just about counts as a net-benefit to the project, but it's a pretty slim margin.
I do my best on the Lua community support (ML, webhosting, etc) but I've not really been a part of the community for a couple of years now. I'd like to think they still appreciate my efforts, but that's about it.
I've really heavily invested my efforts into Rust related stuff as you will see.
I think that, over all, I'm doing okay here, a "B-" since I could do better but I'm not negative-impact anywhere to my knowledge.
5. Give back to the Rust community
This is one software/community place where I think I've done pretty well. I started the year looking at various parts of the Rust ecosystem, but ended up settled into Rustup where I joined the working group and began in earnest to help deal with issues and improve what I see to be the gateway to the Rust ecosystem.
As you will know if you follow this blog, I ended up making the Rustup 1.17.0 release, which was a nerve-wracking experience that I will do better with next time. Fortunately the community is amazing and they were super-forgiving of my cockup.
I also hang around on the #wg-rustup
Discord channel and other channels
on that server, helping where I can. I've been running the Rustup working
group weekly meetings, and I feel like I've made a pretty positive impact on
things. Rustup is a slow moving tool which we try and change only
conservatively, but it is a critical part of the experience of the Rust
ecosystem so we do want to make it as good as it can be.
All in all, I think I deserve an "A" for my efforts here. I could do a bit more and that'd give me the "+" but for now I'm satisfied.
6. Be better at tidying up
I started the year out strongly, doing well at this, but over the months I've slipped back into my bad habits. I'm still very bad at this part of "adulting" and have nothing useful to report beyond "Trying to develop multiple habits simultaneously is super-hard". I think that once the c25k effort is over and I can reduce my running efforts, resuming "normal" gym routines etc, I may have some mental energy left to try and develop better tidying habits.
All in all this is a big fat "F" for fail.
7. Save up money for renovations
I believe that I've been doing pretty well at this. Since I don't go out much, I don't eat out anywhere near as much as I used to, and I don't generally buy toys (e.g. I recently got an upgraded graphics card for free because Rob decided he needed a shinier one and so I got a hand-me-down), I've been able to put a good chunk of cash away. Not enough yet for a new kitchen, but it's getting there slowly. Of course, the next point might eat away a good chunk of it…
I'm giving myself an "A" for this, because I do have a pretty healthy looking savings account, even if I can see all the looming bills for renovations.
国内玩facebook加速软件
Well, this one hasn't happened yet, though I do have a week off booked for after easter, that's in next quarter so I'm guessing it doesn't count for now.
Rob will be off to Japan in the summer, so perhaps I'll take some time off at that point to have a break. Of course, with Rob away, it'd be a staycation which isn't quite what I had in mind, so who knows what I'll do instead. I'm so much of a homebody that a staycation is still a good holiday in my view, but it's not what I meant when I said a "proper holiday" since that needs to be a break from all the "normal" stuff in my view.
在国内怎么用vpn加速器来登陆注册玩欧服TERA降低游戏 ...:2021-6-15 · 在国内怎么用vpn加速器来登陆注册玩欧服TERA降低游戏延迟.doc百度云网盘下载,资源大小633.00 KB,搜索盘不提供保存服务,在国内怎么用vpn加速器来登陆注册玩欧服TERA降低游戏延迟.doc下载地址将自动跳到百度云网盘下载。
npv佛跳墙下载
All-in-all I think I've done pretty well. My scores are B, A+, C, B-, A, F, A, C, which, if we ignore the F is an average of A, though the F does ruin things a little. Hopefully in another 3 months I'll be able to report better progress.
Today marks the release of rustup
version 1.17.0 which
is both the first version of rustup
which I have contributed code to, and
also the first version which I was responsible for preparing the release of.
I thought I ought to detail the experience, but first, a little background…
At the end of last year, leading into this year, I made some plans which included an explicit statement to "give back" to the Rust community as I'd received a lot of help with, and enjoyment in, Rust from the community over the previous couple of years. I looked for ways I could contribute, including making a tiny wording PR against the compiler which I won't even bother linking here, but eventually I decided to try and help with the rust-lang/rustup.rs repository and tried to tackle some of the issues therein.
Nick Cameron was, at the time, about to step down as a lead of the tools team and he ended up talking to me about maybe joining a working group to look after Rustup. I agreed and a little earlier this year, I became part of the Rustup working group, which is a sub-group of the Cargo team, part of the Rust developer tools teams.
Over the past few weeks we've been preparing a new release of Rustup to include some useful bug fixes and a few little feature tweaks. Rustup is not as glamorous a part of the ecosystem as perhaps Cargo or Rustc itself, but it's just as important I think, since it's the primary gateway through which people acquire Rust, and interact with the Rust toolchain ecosystem.
On Tuesday evening, as part of our weekly meeting, we discussed the 1.17.0 release plans and process, and since I'm very bad at stepping back at the right moment, I ended up volunteering to run the release checklist through and push 1.17.0 out of the door. Thankfully, between Nick and Alex Crichton we had a good set of instructions and so I set about making the release. I prepared a nice series of commits updating the version numbers, ensuring the lock file was up to date, making the shell script installer frontend include the right version numbers, and pushed them off to be built by the CI. Unfortunately a break in a library we depend on, which only showed its face on our mingw builders (not normally part of the CI since there are so few available to the org) meant that I had to reissue the build and go to bed.
Note that I said I had to go to bed - this was nearing midnight and I was due up before 7am the following day. This might give you some impression of the state of mind I was in trying to do this release and thus perhaps a hint of where I'm going to be going with this post…
In the morning, I checked and the CI pipelines had gone green, so I waited until Alex showed up (since he was on UTC-6) and as soon as I spotted him online, around 14:45 UTC, I pinged him and he pushed the button to prep the release after we did a final check that things looked okay together. The release went live at 14:47 UTC.
And by 15:00 UTC we'd found a previously unnoticed bug - in the shell installer frontend - that I had definitely tested the night before. A "that can't possibly have ever worked" kind of bug which was breaking any CI job which downloaded rustup from scratch. Alex deployed a hotfix straight to the dist server at 15:06 UTC to ensure that as few people as possible encountered the issue, though we did get one bug report (filed a smidge later at 15:15 UTC) about it.
By this point I was frantic - I KNEW that I'd tested this code, so how on earth was it broken? I went rummaging back through the shell history on the system where I'd done the testing, reconstructing the previous night's fevered testing process and eventually discovered what had gone wrong. I'd been diffing the 1.16.0 and 1.17.0 releases and had somehow managed to test the OLD shell frontend rather than the new one. So the change to it which broke the world hadn't been noticed by me at that point.
I sorted a fix PR out and we now have some issues open regarding ensuring that this never happens again. But what can we do to ensure that the next release goes more smoothly? For one, we need as a team to work out how to run mingw tests more regularly, and ideally on the PRs. For two, we need to work out how we can better test, the shell frontend which is currently only manually verified, under CI when its sole purpose is to download rustup from the Internet, making it a bit of a pain to verify in a CI environment.
But… we will learn, we will grow, and we won't make these mistakes again. I had been as careful as I thought I could be in preparing 1.17.0, and I still had two painful spikes, one from uncommonly run CI, and one from untested code. No matter how careful one is, one can still be bitten by things.
On a lighter note, for those who use rustup
and wonder what's in 1.17.0 over
the previous (1.16.0) release, here's a simplified view onto a mere 国内玩facebook加速软件 of
the changes...
- Better formatting of long download times. Manish Goregaokar
- Various improvements to
国内玩facebook加速软件
. Lzu Tao - A variety of error message improvements. Hirokazu Hata
- Prevent panic on missing components. Nick Cameron
- Support non-utf8 arguments in proxies. Andy Russell
- More support for
homebrew
. Markus Reiter - Support for more documents in
国内玩facebook加速软件
. Wang Kong - Display progress during component unpack. Daniel Silverstone
- Don't panic on bad
default-host
. Daniel Silverstone - A variety of code cleanups and fixes. So many of them. 国内玩facebook加速软件
- Better error reporting for missing binaries. Alik Aslanyan
- Documentation of, and testing for, powershell completions. Matt Gucci
- Various improvements to display of information in things like
国内玩facebook加速软件
orrustup status
. 国内如何免费上facebook - Ignoring of
EPIPE
in certain circumstances to improve scripting use of国内上facebook教程
. Niklas Claesson - Deprecating cURL in
rustup
'sdownload
internal crate. Trevor Miranda - Error message improvements wrt. unavailable components. Daniel Silverstone
- Improvements in component listing API for better automation. Naftuli Kay
If I missed your commits out, it doesn't mean I thought they weren't important, it merely means I am lazy
As you can see, we had a nice selection of contributors, from Rustup WG members, to drive-by typo fixes (unlisted for the most part) to some excellent new contributors who are being more and more involved as time passes.
We have plenty of plans for 1.18.0, mostly centered around tidying up the
codebase more, getting rid of legacies in the code where we can, and making
it easier to see the wood for the trees as we bring rustup
up-to-snuff as
a modern part of the Rust ecosystem.
If you'd like to participate in Rustup development, why not join us on our
discord server? You can visit http://discord.gg/rust-lang and once you've
jumped through some of the anti-spam hoops (check your DMs on joining) you can
come along to #wg-rustup
and we'll be pleased to have you help. Failing
that, you can always just open issues or PRs on
http://github.com/rust-lang/rustup.rs if you have something useful to
contribute.
At the end of last year I made eight statements about what I wanted to do throughout 2023. I tried to split them semi-evenly between being a better adult human and being a better software community contributor. I have had a few weeks now to settle my thoughts around what they mean and I'd like to take some time to go through the eight and discuss them a little more.
I've been told that doing this reduces the chance of me sticking to the points because simply announcing the points and receiving any kind of positive feedback may stunt my desire to actually achieve the goals. I'm not sure about that though, and I really want my wider friends community to help keep me honest about them all. I've set a reminder for April 7th to review the situation and hopefully be able to report back positively on my progress.
My list of goals was stated in a pair of tweets:
- Continue to lose weight and get fit. I'd like to reach 80kg during the year if I can
- Begin a couch to 5k and give it my very best
- Focus my software work on finishing projects I have already started
- 国内怎么上fb或者推特,想翻出去看一看。。 - 好运百科(www ...:2021-8-5 · 话题:推特账号可不可伍登录facebook 推荐回答:可伍用VPN上去此类国外网站。 我的百度空间里有(点我的ID名去他的空间) 一般免费的有流量或者使用时间限制 而且线路是伍美国的为主 如果只是鄱墙看看网页 或者玩美服加速还是可伍的 如果你是要国内的一般是买收费的,里面有国内的IP线路 经常 …
- 腾讯网游加速器——绝地求生首选加速器【官方推荐】 - QQ:2021-5-28 · 腾讯官方出品的海外游戏网络加速工具。完美加速绝地求生、彩虹六号、GTA5、无限法则、战地等上百款海外游戏,有效解决游戏中出现的延迟、丢包、卡顿等问题。72小时超长免费试用,体验后 …
- Be better at tidying up
- Save up lots of money for renovations
- Go on a proper holiday
npv佛跳墙下载
Some of you may be aware already, others may not, that I have been making an effort to shed some of my excess weight over the past six or seven months. I "started" in May of 2018 weighing approximately 141kg and I am, as of this morning, weighing approximately 101kg. Essentially that's a semi-steady rate of 5kg per month, though it has, obviously, been slowing down of late.
In theory, given my height of roughly 178cm I should aim for a weight of around 70kg. I am trying to improve my fitness and to build some muscle and as such I'm aiming long-term for roughly 75kg. My goal for this year is to continue my improvement and to reach and maintain 80kg or better. I think this will make a significant difference to my health and my general wellbeing. I'm already sleeping better on average, and I feel like I have more energy over all. I bought a Garmin Vivoactive 3 and have been using that to track my general health and activity. My resting heart rate has gone down a few BPM over the past six months, and I can see my general improvement in sleep etc over that time too. I bought a 国内玩facebook加速软件 to track my weight and body composition, and that is also showing me good values as well as encouraging me to weigh myself every day and to learn how to interpret the results.
I've been managing my weight loss partly by means of a 16:8 intermittent fasting protocol, combined with a steady calorie deficit of around 1000kcal/day. While this sounds pretty drastic, I was horrendously overweight and this was critical to getting my weight to shift quickly. I expect I'll reduce that deficit over the course of the year, hence I'm only aiming for a 20kg drop over a year rather than trying to maintain what could in theory be a drop of 30kg or more.
In addition to the IF/deficit, I have been more active. I bought an e-bike and slowly got going on that over the summer, along with learning to enjoy walks around my local parks and scrubland. Since the weather got bad enough that I didn't want to be out of doors I joined a gym where I have been going regularly since September. Since the end of October I have been doing a very basic strength training routine and my shoulders do seem to be improving for it. I can still barely do a pushup but it's less embarassingly awful than it was.
Given my efforts toward my fitness, my intention this year is to extend that to include a Couch to 5k type effort. Amusingly, Garmin offer a self adjusting "coach" called Garmin Coach which I will likely use to guide me through the process. While I'm not committing to any, maybe I'll get involved in some parkruns this year too. I'm not committing to reach an ability to run 5k because, quite simply, my bad leg may not let me, but I am committing to give it my best. My promise to myself was to start some level of jogging once I hit 100kg, so that's looking likely by the end of this month. Maybe February is when I'll start the c25k stuff in earnest.
npv佛跳墙下载
I have put three items down in this category to get better at this year. One is a big thing for our house. I am, quite simply put, awful at tidying up. I leave all sorts of things lying around and I am messy and lazy. I need to fix this. My short-term goal in this respect is to pick one room of the house where the mess is mostly mine, and learn to keep it tidy before my checkpoint in April. I think I'm likely to choose the Study because it's where others of my activities for this year will centre and it's definitely almost entirely my mess in there. I'm not yet certain how I'll learn to do this, but it has been a long time coming and I really do need to. It's not fair to my husband for me to be this awful all the time.
The second of these points is to explicitly save money for renovations. Last year we had a new bathroom installed and I've been seriously happy about that. We will need to pay that off this year (we have the money, we're just waiting as long as we can to earn the best interest on it first) and then I'll want to be saving up for another spot of renovations. I'd like to have the kitchen and dining room done - new floor, new units and sink in the kitchen, fix up the messy wall in the dining room, have them decorated, etc. I imagine this will take quite a bit of 2023 to save for, but hopefully this time next year I'll be saying that we managed that and it's time for the next part of the house.
Finally I want to take a proper holiday this year. It has been a couple of years since Rob and I went to Seoul for a month, and while that was excellent, it was partly "work from home" and so I'd like to take a holiday which isn't also a conference, or working from home, or anything other than relaxation and seeing of interesting things. This will also require saving for, so I imagine we won't get to do it until mid to late 2023, but I feel like this is part of a general effort I've been making to take care of myself more. The fitness stuff above being physical, but a proper holiday being part of taking better care of my mental health.
npv佛跳墙下载
2018 was not a great year for me in terms of getting projects done. I have failed to do almost anything with Gitano and I did not doing well with Debian or other projects I am part of. As such, I'm committing to do better by my projects in 2023.
First, and foremost, I'm pledging to focus my efforts on finishing projects which I've already started. I am very good at thinking "Oh, that sounds fun" and starting something new, leaving old projects by the wayside and not getting them to any state of completion. While software is never entirely "done", I do feel like I should get in-progress projects to a point that others can use them and maybe contribute too.
除了推特。Facebook,Instagram,还有类似很火的软件吗 ...:2021-12-23 · 微信 有土鳖谷歌等,这些都不错,不过国内都打不开,需要借助ysscloud的加速器辅助连接才可伍打开。 可伍试一下玩LINE 国内玩line用雷光VPN上 你好! line 仅伋表个人观点,不喜勿喷,谢谢。 pinterest这个图片社交的 tumblr 还可伍不用加速器,直接 ...
I have been working, on and off, with Rob on a new point-of-sale for our local pub Ye Olde Vic and I am committing to get it done to a point that we can experiment with using it in the pub by the summer. Also I was working on a way to measure fluid flow through a pipe so that we can correlate the pulled beer with the sales and determine wastage etc. I expect I'll get back to the "beer'o'meter" once the point-of-sale work is in place and usable. I am not going to commit to getting it done this year, but I'd like to make a dent in the remaining work for it.
I have an on-again off-again relationship with some code I wrote quite a while
ago when learning Rust. I am speaking of my Yarn
implementation called (imaginatively) rsyarn. I'd like to have that
project reworked into something which can be used with Cargo and
associated tooling nicely so that running cargo test
in a Rust project can
result in running yarns as well.
在国内使用IPAD怎么上Facebook?-ZOL问答:在国内使用IPAD上Facebook,需要设置VPN。设置操作为: 1:点击机器主界面“设置” 。2:点击“通用” ,选择“VPN” 。3:点击“添加VPN配置”。 4:协议类型选择“PPTP”,“描述”中输入“雷光VPN”,在服务器栏中填入服务器IP,在账户和密码栏中填入用户名和密码,其他设置保持不变,然后点击 ...
On a more community-minded note, one of my goals is to ensure that I'm always a net benefit to any project I join or work on in 2023. I am very aware that in a lot of cases, I provide short drive-by contributions to projects which can end up costing that project more than I gave them in benefit. I want to stop that behaviour and instead invest more effort into fewer projects so that I always end up a net benefit to the project in question. This may mean spending longer to ensure that an issue I file has enough in it that I may not need to interact with it again until verification of a correct fix is required. It may mean spending time fixing someone elses' issues so that there is the engineering bandwidth for someone else to fix mine. I can't say for sure how this will manifest, beyond being up-front and requesting of any community I decide to take part in, that they tell me if I end up costing more than I'm bringing in benefit.
npv佛跳墙下载
I've mentioned Rust above, and this is perhaps the most overlappy of my promises for 2023. I want to give back to the Rust community because over the past few years as I've learned Rust and learned more and more about the community, I've seen how much of a positive effect they've had on my life. Not just because they made learning a new programming langauge so enjoyable, but because of the community's focus on programmers as human beings. The fantastic documentation ethics, and the wonderfully inclusive atmosphere in the community meant that I managed to get going with Rust so much more effectively than with almost any other language I've ever tried to learn since Lua.
I have, since Christmas, been slowly involving myself in the Rust community more and more. I joined one of the various Discord servers and have been learning about how crates.io is managed and I have been contributing to rustup.rs which is the initial software interface most Rust users encounter and forms such an integral part of the experience of the ecosystem that I feel it's somewhere I can make a useful impact.
While I can't say a significant amount more right now, I hope I'll be able to blog more in the future on what I'm up to in the Rust community and how I hope that will benefit others already in, and interested in joining, the fun that is programming in Rust.
In summary, I hope at least some of you will help to keep me honest about my intentions for 2023, and if, in return, I can help you too, please feel free to let me know.
I glanced back over my shoulder to see the Director approaching. Zhe stood next to me, watched me intently for a few moments, before turning and looking out at the scape. The water was preturnaturally calm, above it only clear blue. A number of dark, almost formless, shapes were slowly moving back and forth beneath the surface.
"Is everything in readiness?" zhe queried, sounding both impatient and resigned at the same time. "And will it work?" zhe added. My predecessor, and zir predecessor before zem, had attempted to reach the same goal now set for myself.
"I believe so" I responded, sounding perhaps slightly more confident than I felt. "All the preparations have been made, everything is in accordance with what has been written". The director nodded, zir face pinched, with worry writ across it.
I closed my eyes, took a deep breath, opened them, raised my hand and focussed on the scape, until it seemed to me that my hand was almost floating on the water. With all of my strength of will I formed the incantation, repeating it over and over in my mind until I was sure that I was ready. I released it into the scape and dropped my arm.
The water began to churn, the blue above darkening rapidly, becoming streaked with grey. The shapes beneath the water picked up speed and started to grow, before resolving to what appeared to be stylised Earth whales. Huge arcs of electricity speared the water, a screaming, crashing, wall of sound rolled over us as we watched, a foundation rose up from the depths on the backs of the whale-like shapes wherever the lightning struck.
Chunks of goodness-knows-what rained down from the grey streaked morass, thumping into place seamlessly onto the foundations, slowly building what I had envisioned. I started to allow myself to feel hope, things were going well, each tower of the final solution was taking form, becoming the slick and clean visions of function which I had painstakingly selected from among the masses of clamoring options.
Now and then, the whale-like shapes would surface momentarily near one of the towers, stringing connections like bunting across the water, until the final design was achieved. My shoulders tightened and I raised my hand once more. As I did so, the waters settled, the grey bled out from the blue, and the scape became calm and the towers shone, each in its place, each looking exactly as it should.
Chanting the second incantation under my breath, over and over, until it seemed seared into my very bones, I released it into the scape and watched it flow over the towers, each one ringing out as the command reached it, until all the towers sang, producing a resonant and consonant chord which rose of its own accord, seeming to summon creatures from the very waters in which the towers stood.
The creatures approached the towers, reached up as one, touched the doors, and screamed in horror as their arms caught aflame. In moments each and every creature was reduced to ashes, somehow fundamentally unable to make use of the incredible forms I had wrought. The Director sighed heavily, turned, and made to leave. The towers I had sweated over the design of for months stood proud, beautiful, worthless.
手机加速工具|加速兔安卓版 v1.0 官方最新版_软件侠下载站:2021-2-14 · 4.全局加速:所有流量都从加速兔加速器通过,不论是国内还是国外。 5.国外网络加速:外贸推广、海外伋购、美股、港股、外汇黄金交易,访问Youtube、twitter、facebook、Instagram、google等国外网络速度更快更稳定。 加速兔特色介绍:
Returning to my chambers, I snatched up the book from my workbench. The whale-like creature winking to me from the cover, grinning, as though it knew what I had tried to do and relished my failure. I cast it into the waste chute and went back to my drafting table to design new towers, towers which might be compatible with the creatures which were needed to inhabit them and breath life into their very structure, towers which would involve no grinning whales.
This blog is powered by ikiwiki.